Engineering Hot Rods, LLC
Front Suspension Tech Sheet
P.O. Box 2584 Chino
Valley, AZ. 86323
(928) 636-5350
E-mail strodeng@pair.com
Web site http://www.streetrodengineering.com
In most
applications the spindle centerline will be
1/2" above the bottom of the frame rail at axle centerline.
(Weighted Ride Height)
Should you require a different ride height please indicate your preference.
Note: “B” must be vertical 90 degree with level plane or rake at
which car sits.
| Width of Frame Outside to Outside |
Height of Frame Top to Bottom |
Width of Frame Lip (Top) |
Width of Frame inside Lip to inside Lip (Top) |
|
| A | ||||
| B | ||||
| C |
D - Front Fender Opening Lip,
Side-to-Side measurement _____________
Overall width of car (fender to fender) ___________
Wheel base (Center of front axle to center of rear axle) _____________
Name
___________________________________________________________________
Phone ( ) ____ - ________ Fax
( ) ____ - ______ E-mail _____________@____________
Year ______ Make ____________________ Model ______________________ Doors_______