There are two types of intermediate shafts. DD or Splined. Either shaft is
ideal for
for your steering system. Splined shafts allow a more precise adjustments. DD
can only be phased 180 degrees while splined shafts can be rotated fractionally.
The advantage to DD, however, is that it can be cut to any length elimination
the
the need to pre-measure. You will need to choose which shafting you will be
using
prior to ordering the universal joints, since one side accommodates the shaft.
Manufactured using a pre-ground alloy steel for strength and cosmetics.
Available with electroless nickel plating for corrosion resistance. Shafts
are
manufactured in 2" increments: 4" to 36" lengths. Splined shafts
have 2" of
spline on each side. This allows for up to 2" of total trim.
|
Plated & Polished Corrosion Proof Shafts |
||
|
FR1811 |
Stainless Support Bearing |
|
|
FR1850PL |
18" DD Plated Shaft |
|
|
FR1851PL |
36" DD Plated Shaft |
|
|
FR1860PL |
5" Single Spline Plated |
|
|
FR1861PL |
16" Single Spline Plated |
|
|
FR1862PL |
36" Single Spline Plated |
|
|
FR1870-xPL |
Spline both ends 4"-16" (2" increments) |
|
|
FR1871-xxPL |
Spine both ends 18" - 36" (2" increments) |
|
|
FR9950C |
1"DD Tube 29" Plated |
|
|
Unplated Shafts |
||
|
FR1810 |
Support Bearing 3/4" |
|
|
FR1850 |
DD Shaft-18" |
|
|
FR1851 |
DD Shaft-36" |
|
|
FR1860 |
Single Spline 5" |
|
|
FR1861 |
Single Spline 16" |
|
|
FR1862 |
Single Spline 36" |
|
|
FR1870-x |
Spline both ends 4" - 16" (2" increments) |
|
|
FR1871-xx |
Spline both ends 18" - 36" (2" increments) |
|
|
Collapsible Shafts |
||
|
FR1854 |
Collapsible shaft 26" |
|
| FR1854PL | Collapsible shaft 26" Plated | |
| FR1856-S | Collapsible shaft 30" | |
| FR1856-SPL | Collapsible shaft 30" Plated | |
|
FR1856 |
Slip and Collapsible Slip Shaft-38" |
|
| FR1856PL | Slip and Collapsible Slip Shaft-38" Plated | |
|
Aluminum Shafts 3/4" - 48 Spline |
|
|
FR2450-8 |
8" Spline Both Ends |
|
FR2450-12 |
12" Spline Both Ends |
|
FR2450-18 |
18" Spline Both Ends |
| FR2450-22 | 22" Spline Both Ends |
| FR2450-26 | 26" Spline Both Ends |
